Contract 0x67dc6e39a46efcbd9ec7bb8d490eff6df9c9b047

/**
 *Submitted for verification at clvscan.com on 2022-08-01
*/

// File: @openzeppelin/contracts/utils/Context.sol



pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/GSN/Context.sol



pragma solidity >=0.6.0 <0.8.0;


// File: @openzeppelin/contracts/access/Ownable.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: @openzeppelin/contracts/utils/EnumerableSet.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// File: @openzeppelin/contracts/utils/Address.sol



pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: @openzeppelin/contracts/math/SafeMath.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/token/ERC20/IERC20.sol



pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: contracts/RERC20.sol


pragma solidity ^0.6.2;


 /*
 * HuckleberryFinance
 * Reflect Token implementation
 * App:             https://huckleberry.finance
 * GitHub:          https://github.com/huckleberryDex
 */






contract RERC20 is Context, IERC20, Ownable {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _rOwned;
    mapping (address => uint256) private _tOwned;
    mapping (address => mapping (address => uint256)) private _allowances;

    mapping (address => bool) private _isExcluded;
    address[] private _excluded;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    uint256 _taxFee = 100; // 1%
    uint256 _maxTaxFee = 1000; // 10%
    uint256 private constant _GRANULARITY = 100;

    uint256 private constant MAX = ~uint256(0);
    uint256 private _tTotal;
    uint256 private _rTotal;
    uint256 private _tFeeTotal;

    event UpdateTaxFee(uint256 previousTaxFee, uint256 newTaxFee);

    constructor (
        uint256 initialSupply,
        string memory name,
        string memory symbol,
        uint8 decimals,
        uint256 taxFee
        ) public {
        _name = name;
        _symbol = symbol;
        _decimals = decimals;
        _taxFee = taxFee;

        _tTotal = initialSupply;
        _rTotal = (MAX - (MAX % _tTotal));

        _rOwned[_msgSender()] = _rTotal;
        emit Transfer(address(0), _msgSender(), _tTotal);
    }

    function name() public view returns (string memory) {
        return _name;
    }

    function symbol() public view returns (string memory) {
        return _symbol;
    }

    function decimals() public view returns (uint8) {
        return _decimals;
    }

    function totalSupply() public view override returns (uint256) {
        return _tTotal;
    }

    function taxFee() external view returns (uint256) {
        return _taxFee;
    }

    function maxTaxFee() external view returns (uint256) {
        return _maxTaxFee;
    }

    function balanceOf(address account) public view override returns (uint256) {
        if (_isExcluded[account]) return _tOwned[account];
        return tokenFromReflection(_rOwned[account]);
    }

    function transfer(address recipient, uint256 amount) public override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    function allowance(address owner, address spender) public view override returns (uint256) {
        return _allowances[owner][spender];
    }

    function approve(address spender, uint256 amount) public override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    function transferFrom(address sender, address recipient, uint256 amount) public override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    function isExcluded(address account) public view returns (bool) {
        return _isExcluded[account];
    }

    function totalFees() public view returns (uint256) {
        return _tFeeTotal;
    }

    function reflect(uint256 tAmount) external {
        address sender = _msgSender();
        require(!_isExcluded[sender], "Excluded addresses cannot call this function");
        (uint256 rAmount,,,,) = _getValues(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rTotal = _rTotal.sub(rAmount);
        _tFeeTotal = _tFeeTotal.add(tAmount);
    }

    function reflectionFromToken(uint256 tAmount, bool deductTransferFee) public view returns(uint256) {
        require(tAmount <= _tTotal, "Amount must be less than supply");
        (uint256 rAmount, uint256 rTransferAmount,,,) = _getValues(tAmount);
        return deductTransferFee ? rTransferAmount : rAmount;
    }

    function tokenFromReflection(uint256 rAmount) public view returns(uint256) {
        require(rAmount <= _rTotal, "Amount must be less than total reflections");
        uint256 currentRate = _getRate();
        return rAmount.div(currentRate);
    }

    function excludeAccount(address account) external onlyOwner() {
        require(!_isExcluded[account], "Account is already excluded");
        if(_rOwned[account] > 0) {
            _tOwned[account] = tokenFromReflection(_rOwned[account]);
        }
        _isExcluded[account] = true;
        _excluded.push(account);
    }

    function includeAccount(address account) external onlyOwner() {
        require(_isExcluded[account], "Account is already excluded");
        for (uint256 i = 0; i < _excluded.length; i++) {
            if (_excluded[i] == account) {
                _excluded[i] = _excluded[_excluded.length - 1];
                _tOwned[account] = 0;
                _isExcluded[account] = false;
                _excluded.pop();
                break;
            }
        }
    }

    function updateTaxFee(uint256 _fee) public onlyOwner {
        require(_fee <= _maxTaxFee, 'fee must be mess than maxTaxFee');
        uint256 previousTaxFee = _taxFee;
        _taxFee = _fee;
        emit UpdateTaxFee(previousTaxFee, _taxFee);
    }

    function _approve(address owner, address spender, uint256 amount) private {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    function _transfer(address sender, address recipient, uint256 amount) private {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");
        require(amount > 0, "Transfer amount must be greater than zero");
        if (_isExcluded[sender] && !_isExcluded[recipient]) {
            _transferFromExcluded(sender, recipient, amount);
        } else if (!_isExcluded[sender] && _isExcluded[recipient]) {
            _transferToExcluded(sender, recipient, amount);
        } else if (_isExcluded[sender] && _isExcluded[recipient]) {
            _transferBothExcluded(sender, recipient, amount);
        } else {
            /// @dev neither are excluded
            _transferStandard(sender, recipient, amount);
        }
    }

    function _transferStandard(address sender, address recipient, uint256 tAmount) private {
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _reflectFee(rFee, tFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _transferToExcluded(address sender, address recipient, uint256 tAmount) private {
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _reflectFee(rFee, tFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _transferFromExcluded(address sender, address recipient, uint256 tAmount) private {
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
        _tOwned[sender] = _tOwned[sender].sub(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _reflectFee(rFee, tFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _transferBothExcluded(address sender, address recipient, uint256 tAmount) private {
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee, uint256 tTransferAmount, uint256 tFee) = _getValues(tAmount);
        _tOwned[sender] = _tOwned[sender].sub(tAmount);
        _rOwned[sender] = _rOwned[sender].sub(rAmount);
        _tOwned[recipient] = _tOwned[recipient].add(tTransferAmount);
        _rOwned[recipient] = _rOwned[recipient].add(rTransferAmount);
        _reflectFee(rFee, tFee);
        emit Transfer(sender, recipient, tTransferAmount);
    }

    function _reflectFee(uint256 rFee, uint256 tFee) private {
        _rTotal = _rTotal.sub(rFee);
        _tFeeTotal = _tFeeTotal.add(tFee);
    }

    function _getValues(uint256 tAmount) private view returns (uint256, uint256, uint256, uint256, uint256) {
        (uint256 tTransferAmount, uint256 tFee) = _getTValues(tAmount);
        uint256 currentRate = _getRate();
        (uint256 rAmount, uint256 rTransferAmount, uint256 rFee) = _getRValues(tAmount, tFee, currentRate);
        return (rAmount, rTransferAmount, rFee, tTransferAmount, tFee);
    }

    function _getTValues(uint256 tAmount) private view returns (uint256, uint256) {
        uint256 tFee = ((tAmount.mul(_taxFee)).div(_GRANULARITY)).div(100);
        uint256 tTransferAmount = tAmount.sub(tFee);
        return (tTransferAmount, tFee);
    }

    function _getRValues(uint256 tAmount, uint256 tFee, uint256 currentRate) private pure returns (uint256, uint256, uint256) {
        uint256 rAmount = tAmount.mul(currentRate);
        uint256 rFee = tFee.mul(currentRate);
        uint256 rTransferAmount = rAmount.sub(rFee);
        return (rAmount, rTransferAmount, rFee);
    }

    function _getRate() private view returns(uint256) {
        (uint256 rSupply, uint256 tSupply) = _getCurrentSupply();
        return rSupply.div(tSupply);
    }

    function _getCurrentSupply() private view returns(uint256, uint256) {
        uint256 rSupply = _rTotal;
        uint256 tSupply = _tTotal;
        for (uint256 i = 0; i < _excluded.length; i++) {
            if (_rOwned[_excluded[i]] > rSupply || _tOwned[_excluded[i]] > tSupply) return (_rTotal, _tTotal);
            rSupply = rSupply.sub(_rOwned[_excluded[i]]);
            tSupply = tSupply.sub(_tOwned[_excluded[i]]);
        }
        if (rSupply < _rTotal.div(_tTotal)) return (_rTotal, _tTotal);
        return (rSupply, tSupply);
    }

}

// File: contracts/FINN.sol


pragma solidity 0.6.12;

/*
 * HuckleberryFinance
 * App:             https://huckleberry.finance
 * GitHub:          https://github.com/huckleberryfinance
 */


contract FINN is RERC20 {
    // 1% fee to all holders
    constructor (uint256 initialSupply) public RERC20(initialSupply, "FINN Token", "FINN", 18, 0) {}

}


// File: @openzeppelin/contracts/token/ERC20/SafeERC20.sol



pragma solidity >=0.6.0 <0.8.0;




/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// File: contracts/HuckleberryFarm.sol


pragma solidity 0.6.12;

/*
 * HuckleberryFinance
 * App:             https://huckleberry.finance
 * GitHub:          https://github.com/huckleberryDex
 */









// HuckleberryFarm is the master of FINN. He can make FINN and he is a fair guy.
//
// Note that it's ownable and the owner wields tremendous power. The ownership
// will be transferred to a governance smart contract once FINN is sufficiently
// distributed and the community can show to govern itself.
//
// Have fun reading it. Hopefully it's bug-free. God bless.
contract HuckleberryFarm is Ownable {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // Info of each user.
    struct UserInfo {
        uint256 amount;     // How many LP tokens the user has provided.
        uint256 rewardDebt; // Reward debt. See explanation below.
        //
        // We do some fancy math here. Basically, any point in time, the amount of WASPs
        // entitled to a user but is pending to be distributed is:
        //
        //   pending reward = (user.amount * pool.accRewardPerShare) - user.rewardDebt
        //
        // Whenever a user deposits or withdraws LP tokens to a pool. Here's what happens:
        //   1. The pool's `accRewardPerShare` (and `lastRewardTimestamp`) gets updated.
        //   2. User receives the pending reward sent to his/her address.
        //   3. User's `amount` gets updated.
        //   4. User's `rewardDebt` gets updated.
    }

    // Info of each pool.
    struct PoolInfo {
        IERC20 lpToken;           // Address of LP token contract.
        uint256 allocPoint;       // How many allocation points assigned to this pool. WASPs to distribute per block.
        uint256 lastRewardTimestamp;  // Last block number that WASPs distribution occurs.
        uint256 accRewardPerShare;  // Accumulated WASPs per share, times 1e12. See below.
    }

    // The FINN TOKEN!
    FINN public finn;
    // Dev address.
    address public devaddr;
    
    // The block number when FINN mining starts.
    uint256 public startTime;
    // Block number when test FINN period ends.
    uint256 public allEndTime;
    // FINN tokens created per block.
    uint256 public finnPerSecond;

    uint256 public constant USER_PERCENT = 100;

    uint256 public constant EXTRA_PERCENT = 0;

    // Info of each pool.
    PoolInfo[] public poolInfo;
    // Info of each user that stakes LP tokens.
    mapping (uint256 => mapping (address => UserInfo)) public userInfo;
    // Total allocation poitns. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint = 0;

    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);

    constructor(
        FINN _finn,
        address _devaddr,
        uint256 _finnPerSecond,
        uint256 _startTime,
        uint256 _allEndTime
    ) public {
        finn = _finn;
        devaddr = _devaddr;
        finnPerSecond = _finnPerSecond;
        startTime = _startTime;
        allEndTime = _allEndTime;
    }

    function poolLength() external view returns (uint256) {
        return poolInfo.length;
    }

    // Add a new lp to the pool. Can only be called by the owner.
    // XXX DO NOT add the same LP token more than once. Rewards will be messed up if you do.
    function add(uint256 _allocPoint, IERC20 _lpToken, bool _withUpdate) public onlyOwner {
        if (_withUpdate) {
            massUpdatePools();
        }
        uint256 lastRewardTimestamp = block.timestamp > startTime ? block.timestamp : startTime;
        totalAllocPoint = totalAllocPoint.add(_allocPoint);
        poolInfo.push(PoolInfo({
            lpToken: _lpToken,
            allocPoint: _allocPoint,
            lastRewardTimestamp: lastRewardTimestamp,
            accRewardPerShare: 0
        }));
    }

    // Update the given pool's FINN allocation point. Can only be called by the owner.
    function set(uint256 _pid, uint256 _allocPoint, bool _withUpdate) public onlyOwner {
        if (_withUpdate) {
            massUpdatePools();
        }
        totalAllocPoint = totalAllocPoint.sub(poolInfo[_pid].allocPoint).add(_allocPoint);
        poolInfo[_pid].allocPoint = _allocPoint;
    }

    // Return reward multiplier over the given _from to _to second.
    function getMultiplier(uint256 _from, uint256 _to) public view returns (uint256) {
        if (_from >= allEndTime) {
            return 0;
        }

        if (_to < startTime) {
            return 0;
        }

        uint from = _from;
        uint to = _to;

        if (from < startTime) {
            from = startTime;
        }

        if (to > allEndTime) {
            to = allEndTime;
        }
        
        return to.sub(from);
    }

    // View function to see pending reward on frontend.
    function pendingReward(uint256 _pid, address _user) external view returns (uint256) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accRewardPerShare = pool.accRewardPerShare;
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (block.timestamp > pool.lastRewardTimestamp && lpSupply != 0) {
            uint256 multiplier = getMultiplier(pool.lastRewardTimestamp, block.timestamp);
            uint256 finnReward = multiplier.mul(finnPerSecond).mul(pool.allocPoint).div(totalAllocPoint);
            accRewardPerShare = accRewardPerShare.add(finnReward.mul(1e12).div(lpSupply));
        }
        return user.amount.mul(accRewardPerShare).div(1e12).sub(user.rewardDebt);
    }

    // Update reward vairables for all pools. Be careful of gas spending!
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
    }

    // Update reward variables of the given pool to be up-to-date.
    function updatePool(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        if (block.timestamp <= pool.lastRewardTimestamp) {
            return;
        }
        uint256 lpSupply = pool.lpToken.balanceOf(address(this));
        if (lpSupply == 0) {
            pool.lastRewardTimestamp = block.timestamp;
            return;
        }
        uint256 multiplier = getMultiplier(pool.lastRewardTimestamp, block.timestamp);
        uint256 finnReward = multiplier.mul(finnPerSecond).mul(pool.allocPoint).div(totalAllocPoint);
        pool.lastRewardTimestamp = block.timestamp;
        uint256 devAmount = finnReward.mul(EXTRA_PERCENT).div(USER_PERCENT);
        if (devAmount > 0) {
            finn.transfer(devaddr, devAmount);
        }
        pool.accRewardPerShare = pool.accRewardPerShare.add(finnReward.mul(1e12).div(lpSupply));
    }

    // Deposit LP tokens to HuckleberryFarm for FINN allocation.
    function deposit(uint256 _pid, uint256 _amount) public {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        updatePool(_pid);
        if (user.amount > 0) {
            uint256 pending = user.amount.mul(pool.accRewardPerShare).div(1e12).sub(user.rewardDebt);
            safeFinnTransfer(msg.sender, pending);
        }
        if(_amount > 0) {
            user.amount = user.amount.add(_amount);
        }
        user.rewardDebt = user.amount.mul(pool.accRewardPerShare).div(1e12);

        if (_amount > 0) {
            pool.lpToken.safeTransferFrom(address(msg.sender), address(this), _amount);
        }
        emit Deposit(msg.sender, _pid, _amount);
    }

    // Withdraw LP tokens from HuckleberryFarm.
    function withdraw(uint256 _pid, uint256 _amount) public {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        updatePool(_pid);
        uint256 pending = user.amount.mul(pool.accRewardPerShare).div(1e12).sub(user.rewardDebt);
        user.amount = user.amount.sub(_amount);
        user.rewardDebt = user.amount.mul(pool.accRewardPerShare).div(1e12);
        safeFinnTransfer(msg.sender, pending);
        pool.lpToken.safeTransfer(address(msg.sender), _amount);
        emit Withdraw(msg.sender, _pid, _amount);
    }

    // Withdraw without caring about rewards. EMERGENCY ONLY.
    function emergencyWithdraw(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        uint256 amount = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;
        pool.lpToken.safeTransfer(address(msg.sender), amount);
        emit EmergencyWithdraw(msg.sender, _pid, amount);
    }

    // Safe finn transfer function, just in case if rounding error causes pool to not have enough token.
    function safeFinnTransfer(address _to, uint256 _amount) internal {
        uint256 bal = finn.balanceOf(address(this));
        if (_amount == 0 || bal == 0) {
            return;
        } else if (_amount > bal) {
            finn.transfer(_to, bal);
        } else {
            finn.transfer(_to, _amount);
        }
    }

    // Update dev address by the previous dev.
    function dev(address _devaddr) public {
        require(msg.sender == devaddr, "Should be dev address");
        devaddr = _devaddr;
    }
}

[{"inputs":[{"internalType":"contract FINN","name":"_finn","type":"address"},{"internalType":"address","name":"_devaddr","type":"address"},{"internalType":"uint256","name":"_finnPerSecond","type":"uint256"},{"internalType":"uint256","name":"_startTime","type":"uint256"},{"internalType":"uint256","name":"_allEndTime","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[],"name":"EXTRA_PERCENT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"USER_PERCENT","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"contract IERC20","name":"_lpToken","type":"address"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"allEndTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_devaddr","type":"address"}],"name":"dev","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"devaddr","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"finn","outputs":[{"internalType":"contract FINN","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"finnPerSecond","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_from","type":"uint256"},{"internalType":"uint256","name":"_to","type":"uint256"}],"name":"getMultiplier","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"massUpdatePools","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"address","name":"_user","type":"address"}],"name":"pendingReward","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"poolInfo","outputs":[{"internalType":"contract IERC20","name":"lpToken","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardTimestamp","type":"uint256"},{"internalType":"uint256","name":"accRewardPerShare","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolLength","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"bool","name":"_withUpdate","type":"bool"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"startTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"updatePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rewardDebt","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000bea4928632e482a0a1241b38f596a311ad7b98b1000000000000000000000000b87a39c5d3f5c53395ba11b5058655a4a8ac82a500000000000000000000000000000000000000000000000003a9f11df23e626e0000000000000000000000000000000000000000000000000000000062f446800000000000000000000000000000000000000000000000000000000068993280

-----Decoded View---------------
Arg [0] : _finn (address): 0xbea4928632e482a0a1241b38f596a311ad7b98b1
Arg [1] : _devaddr (address): 0xb87a39c5d3f5c53395ba11b5058655a4a8ac82a5
Arg [2] : _finnPerSecond (uint256): 264007164098404974
Arg [3] : _startTime (uint256): 1660176000
Arg [4] : _allEndTime (uint256): 1754870400

-----Encoded View---------------
5 Constructor Arguments found :
Arg [0] : 000000000000000000000000bea4928632e482a0a1241b38f596a311ad7b98b1
Arg [1] : 000000000000000000000000b87a39c5d3f5c53395ba11b5058655a4a8ac82a5
Arg [2] : 00000000000000000000000000000000000000000000000003a9f11df23e626e
Arg [3] : 0000000000000000000000000000000000000000000000000000000062f44680
Arg [4] : 0000000000000000000000000000000000000000000000000000000068993280

47232:9122:0:-:0;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;49959:95;;;:::i;:::-;;;;;;;;;;;;;;;;;;;49080:26;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;49323:34;;;:::i;:::-;;;;;;;;;;;;;;;;;;;50223:531;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;48635:16;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;54657:592;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;52894:885;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;55320:385;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;52638:180;;;:::i;:::-;;50850:304;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;48952:42;;;:::i;:::-;;;;;;;;;;;;;;;;;;;48915:28;;;:::i;:::-;;;;;;;;;;;;;;;;;;;2845:148;;;:::i;:::-;;48764:24;;;:::i;:::-;;;;;;;;;;;;;;;;;;;56210:141;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;2194:87;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;51231:473;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;49162:66;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;;;;;51769:786;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;;;;;;;;;;;;;;;;;;48844:25;;;:::i;:::-;;;;;;;;;;;;;;;;;;;48679:22;;;:::i;:::-;;;;;;;;;;;;;;;;;;;;;53853:747;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;3148:244;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::i;:::-;;49003:41;;;:::i;:::-;;;;;;;;;;;;;;;;;;;49959:95;50004:7;50031:8;:15;;;;50024:22;;49959:95;:::o;49080:26::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;49323:34::-;;;;:::o;50223:531::-;2425:12;:10;:12::i;:::-;2414:23;;:7;:5;:7::i;:::-;:23;;;2406:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;50324:11:::1;50320:61;;;50352:17;:15;:17::i;:::-;50320:61;50391:27;50439:9;;50421:15;:27;:57;;50469:9;;50421:57;;;50451:15;50421:57;50391:87;;50507:32;50527:11;50507:15;;:19;;:32;;;;:::i;:::-;50489:15;:50;;;;50550:8;50564:181;;;;;;;;50597:8;50564:181;;;;;;50632:11;50564:181;;;;50679:19;50564:181;;;;50732:1;50564:181;;::::0;50550:196:::1;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2485:1;50223:531:::0;;;:::o;48635:16::-;;;;;;;;;;;;;:::o;54657:592::-;54724:21;54748:8;54757:4;54748:14;;;;;;;;;;;;;;;;;;54724:38;;54773:21;54797:8;:14;54806:4;54797:14;;;;;;;;;;;:26;54812:10;54797:26;;;;;;;;;;;;;;;54773:50;;54834:16;54845:4;54834:10;:16::i;:::-;54861:15;54879:70;54933:4;:15;;;54879:49;54923:4;54879:39;54895:4;:22;;;54879:4;:11;;;:15;;:39;;;;:::i;:::-;:43;;:49;;;;:::i;:::-;:53;;:70;;;;:::i;:::-;54861:88;;54974:24;54990:7;54974:4;:11;;;:15;;:24;;;;:::i;:::-;54960:4;:11;;:38;;;;55027:49;55071:4;55027:39;55043:4;:22;;;55027:4;:11;;;:15;;:39;;;;:::i;:::-;:43;;:49;;;;:::i;:::-;55009:4;:15;;:67;;;;55087:37;55104:10;55116:7;55087:16;:37::i;:::-;55135:55;55169:10;55182:7;55135:4;:12;;;;;;;;;;;;:25;;;;:55;;;;;:::i;:::-;55227:4;55215:10;55206:35;;;55233:7;55206:35;;;;;;;;;;;;;;;;;;54657:592;;;;;:::o;52894:885::-;52946:21;52970:8;52979:4;52970:14;;;;;;;;;;;;;;;;;;52946:38;;53018:4;:24;;;52999:15;:43;52995:82;;53059:7;;;52995:82;53087:16;53106:4;:12;;;;;;;;;;;;:22;;;53137:4;53106:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;53087:56;;53170:1;53158:8;:13;53154:109;;;53215:15;53188:4;:24;;:42;;;;53245:7;;;;53154:109;53273:18;53294:56;53308:4;:24;;;53334:15;53294:13;:56::i;:::-;53273:77;;53361:18;53382:71;53437:15;;53382:50;53416:4;:15;;;53382:29;53397:13;;53382:10;:14;;:29;;;;:::i;:::-;:33;;:50;;;;:::i;:::-;:54;;:71;;;;:::i;:::-;53361:92;;53491:15;53464:4;:24;;:42;;;;53517:17;53537:47;48991:3;53537:29;49043:1;53537:10;:14;;:29;;;;:::i;:::-;:33;;:47;;;;:::i;:::-;53517:67;;53611:1;53599:9;:13;53595:79;;;53629:4;;;;;;;;;;;:13;;;53643:7;;;;;;;;;;;53652:9;53629:33;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;53595:79;53709:62;53736:34;53761:8;53736:20;53751:4;53736:10;:14;;:20;;;;:::i;:::-;:24;;:34;;;;:::i;:::-;53709:4;:22;;;:26;;:62;;;;:::i;:::-;53684:4;:22;;:87;;;;52894:885;;;;;;;:::o;55320:385::-;55379:21;55403:8;55412:4;55403:14;;;;;;;;;;;;;;;;;;55379:38;;55428:21;55452:8;:14;55461:4;55452:14;;;;;;;;;;;:26;55467:10;55452:26;;;;;;;;;;;;;;;55428:50;;55489:14;55506:4;:11;;;55489:28;;55542:1;55528:4;:11;;:15;;;;55572:1;55554:4;:15;;:19;;;;55584:54;55618:10;55631:6;55584:4;:12;;;;;;;;;;;;:25;;;;:54;;;;;:::i;:::-;55684:4;55672:10;55654:43;;;55690:6;55654:43;;;;;;;;;;;;;;;;;;55320:385;;;;:::o;52638:180::-;52683:14;52700:8;:15;;;;52683:32;;52731:11;52726:85;52754:6;52748:3;:12;52726:85;;;52784:15;52795:3;52784:10;:15::i;:::-;52762:5;;;;;52726:85;;;;52638:180;:::o;50850:304::-;2425:12;:10;:12::i;:::-;2414:23;;:7;:5;:7::i;:::-;:23;;;2406:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;50948:11:::1;50944:61;;;50976:17;:15;:17::i;:::-;50944:61;51033:63;51084:11;51033:46;51053:8;51062:4;51053:14;;;;;;;;;;;;;;;;;;:25;;;51033:15;;:19;;:46;;;;:::i;:::-;:50;;:63;;;;:::i;:::-;51015:15;:81;;;;51135:11;51107:8;51116:4;51107:14;;;;;;;;;;;;;;;;;;:25;;:39;;;;50850:304:::0;;;:::o;48952:42::-;48991:3;48952:42;:::o;48915:28::-;;;;:::o;2845:148::-;2425:12;:10;:12::i;:::-;2414:23;;:7;:5;:7::i;:::-;:23;;;2406:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;2952:1:::1;2915:40;;2936:6;::::0;::::1;;;;;;;;2915:40;;;;;;;;;;;;2983:1;2966:6:::0;::::1;:19;;;;;;;;;;;;;;;;;;2845:148::o:0;48764:24::-;;;;:::o;56210:141::-;56281:7;;;;;;;;;;;56267:21;;:10;:21;;;56259:55;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;56335:8;56325:7;;:18;;;;;;;;;;;;;;;;;;56210:141;:::o;2194:87::-;2240:7;2267:6;;;;;;;;;;;2260:13;;2194:87;:::o;51231:473::-;51303:7;51336:10;;51327:5;:19;51323:60;;51370:1;51363:8;;;;51323:60;51405:9;;51399:3;:15;51395:56;;;51438:1;51431:8;;;;51395:56;51463:9;51475:5;51463:17;;51491:7;51501:3;51491:13;;51528:9;;51521:4;:16;51517:65;;;51561:9;;51554:16;;51517:65;51603:10;;51598:2;:15;51594:63;;;51635:10;;51630:15;;51594:63;51684:12;51691:4;51684:2;:6;;:12;;;;:::i;:::-;51677:19;;;;51231:473;;;;;:::o;49162:66::-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;:::o;51769:786::-;51844:7;51864:21;51888:8;51897:4;51888:14;;;;;;;;;;;;;;;;;;51864:38;;51913:21;51937:8;:14;51946:4;51937:14;;;;;;;;;;;:21;51952:5;51937:21;;;;;;;;;;;;;;;51913:45;;51969:25;51997:4;:22;;;51969:50;;52030:16;52049:4;:12;;;;;;;;;;;;:22;;;52080:4;52049:37;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;52030:56;;52119:4;:24;;;52101:15;:42;:59;;;;;52159:1;52147:8;:13;;52101:59;52097:368;;;52177:18;52198:56;52212:4;:24;;;52238:15;52198:13;:56::i;:::-;52177:77;;52269:18;52290:71;52345:15;;52290:50;52324:4;:15;;;52290:29;52305:13;;52290:10;:14;;:29;;;;:::i;:::-;:33;;:50;;;;:::i;:::-;:54;;:71;;;;:::i;:::-;52269:92;;52396:57;52418:34;52443:8;52418:20;52433:4;52418:10;:14;;:20;;;;:::i;:::-;:24;;:34;;;;:::i;:::-;52396:17;:21;;:57;;;;:::i;:::-;52376:77;;52097:368;;;52482:65;52531:4;:15;;;52482:44;52521:4;52482:34;52498:17;52482:4;:11;;;:15;;:34;;;;:::i;:::-;:38;;:44;;;;:::i;:::-;:48;;:65;;;;:::i;:::-;52475:72;;;;;;51769:786;;;;:::o;48844:25::-;;;;:::o;48679:22::-;;;;;;;;;;;;;:::o;53853:747::-;53919:21;53943:8;53952:4;53943:14;;;;;;;;;;;;;;;;;;53919:38;;53968:21;53992:8;:14;54001:4;53992:14;;;;;;;;;;;:26;54007:10;53992:26;;;;;;;;;;;;;;;53968:50;;54029:16;54040:4;54029:10;:16::i;:::-;54074:1;54060:4;:11;;;:15;54056:188;;;54092:15;54110:70;54164:4;:15;;;54110:49;54154:4;54110:39;54126:4;:22;;;54110:4;:11;;;:15;;:39;;;;:::i;:::-;:43;;:49;;;;:::i;:::-;:53;;:70;;;;:::i;:::-;54092:88;;54195:37;54212:10;54224:7;54195:16;:37::i;:::-;54056:188;;54267:1;54257:7;:11;54254:81;;;54299:24;54315:7;54299:4;:11;;;:15;;:24;;;;:::i;:::-;54285:4;:11;;:38;;;;54254:81;54363:49;54407:4;54363:39;54379:4;:22;;;54363:4;:11;;;:15;;:39;;;;:::i;:::-;:43;;:49;;;;:::i;:::-;54345:4;:15;;:67;;;;54439:1;54429:7;:11;54425:118;;;54457:74;54495:10;54516:4;54523:7;54457:4;:12;;;;;;;;;;;;:29;;;;:74;;;;;;:::i;:::-;54425:118;54578:4;54566:10;54558:34;;;54584:7;54558:34;;;;;;;;;;;;;;;;;;53853:747;;;;:::o;3148:244::-;2425:12;:10;:12::i;:::-;2414:23;;:7;:5;:7::i;:::-;:23;;;2406:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3257:1:::1;3237:22;;:8;:22;;;;3229:73;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;3347:8;3318:38;;3339:6;::::0;::::1;;;;;;;;3318:38;;;;;;;;;;;;3376:8;3367:6;::::0;:17:::1;;;;;;;;;;;;;;;;;;3148:244:::0;:::o;49003:41::-;49043:1;49003:41;:::o;636:106::-;689:15;724:10;717:17;;636:106;:::o;23945:179::-;24003:7;24023:9;24039:1;24035;:5;24023:17;;24064:1;24059;:6;;24051:46;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;24115:1;24108:8;;;23945:179;;;;:::o;24824:220::-;24882:7;24911:1;24906;:6;24902:20;;;24921:1;24914:8;;;;24902:20;24933:9;24949:1;24945;:5;24933:17;;24978:1;24973;24969;:5;;;;;;:10;24961:56;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;25035:1;25028:8;;;24824:220;;;;;:::o;25522:153::-;25580:7;25612:1;25608;:5;25600:44;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;25666:1;25662;:5;;;;;;25655:12;;25522:153;;;;:::o;24407:158::-;24465:7;24498:1;24493;:6;;24485:49;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;24556:1;24552;:5;24545:12;;24407:158;;;;:::o;55819:335::-;55895:11;55909:4;;;;;;;;;;;:14;;;55932:4;55909:29;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;55895:43;;55964:1;55953:7;:12;:24;;;;55976:1;55969:3;:8;55953:24;55949:198;;;55994:7;;;55949:198;56032:3;56022:7;:13;56018:129;;;56052:4;;;;;;;;;;;:13;;;56066:3;56071;56052:23;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;56018:129;;;56108:4;;;;;;;;;;;:13;;;56122:3;56127:7;56108:27;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;56018:129;55819:335;;;;:::o;43561:177::-;43644:86;43664:5;43694:23;;;43719:2;43723:5;43671:58;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;43644:19;:86::i;:::-;43561:177;;;:::o;43746:205::-;43847:96;43867:5;43897:27;;;43926:4;43932:2;43936:5;43874:68;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;43847:19;:96::i;:::-;43746:205;;;;:::o;45866:761::-;46290:23;46316:69;46344:4;46316:69;;;;;;;;;;;;;;;;;46324:5;46316:27;;;;:69;;;;;:::i;:::-;46290:95;;46420:1;46400:10;:17;:21;46396:224;;;46542:10;46531:30;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;46523:85;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;46396:224;45866:761;;;:::o;16807:195::-;16910:12;16942:52;16964:6;16972:4;16978:1;16981:12;16942:21;:52::i;:::-;16935:59;;16807:195;;;;;:::o;17859:530::-;17986:12;18044:5;18019:21;:30;;18011:81;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18111:18;18122:6;18111:10;:18::i;:::-;18103:60;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18237:12;18251:23;18278:6;:11;;18298:5;18306:4;18278:33;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;18236:75;;;;18329:52;18347:7;18356:10;18368:12;18329:17;:52::i;:::-;18322:59;;;;17859:530;;;;;;:::o;13889:422::-;13949:4;14157:12;14268:7;14256:20;14248:28;;14302:1;14295:4;:8;14288:15;;;13889:422;;;:::o;20399:742::-;20514:12;20543:7;20539:595;;;20574:10;20567:17;;;;20539:595;20708:1;20688:10;:17;:21;20684:439;;;20951:10;20945:17;21012:15;20999:10;20995:2;20991:19;20984:44;20899:148;21094:12;21087:20;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;20399:742;;;;;;:::o

ipfs://ef9e97402a1c21d2afcf4da31d2a48bf8e088f3f7e31141e15c9b2aa2e5da85e